Fra:
PSSO
PSSO QCA-10000 MK2
11.550,00
m/Moms
(
9.240,00
u/Moms
)
PA Effektforstærker 4 x 2500W max med en vægt på kun 15,7 kg
Lager:
På lager
På lager
Model/varenr.:
10451698
- 4-channel PA amplifier with class I circuitry
- Low weight and height due to integrated switch mode power supply
- Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, concerts)
- 3 operating modes can be selected (stereo, parallel or bridged)
- 4 level controls
- Input sensitivity adjustable
- LED VU meter and LEDs for activated protective circuit (protect) and overload (clip) per channel
- Speaker switch-on delay
- Complete protection set
- Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
- Speaker outputs via lockable Speaker plugs
- Rugged steel chassis with aluminum front panel
- Air flow from front to rear
- The device is cooled by temperature-controlled fan
- Built with NEUTRIK connector
- (19") 48.3 cm rack installation 2 U
Power supply: | 230 V AC, 50 Hz |
Power consumption: | 1150 W 1/8 power |
Output power: | 4 x 2500 W RMS (2 ohms) 4 x 2100 W RMS (4 ohms) 4 x 1300 W RMS (8 ohms) 2 x 5000 W RMS bridged (4 ohms) 2 x 4200 W RMS bridged (8 ohms) |
Power connection: | Fixed power supply cord with safety plug |
Frequency range: | 20 - 20000 Hz |
S/N ratio: | >80 dB |
THD: | <0,05 % at 1 kHz |
Cooling: | 3 x temperature-controlled fan , Air flow from front to rear |
Impedance: | Input: 10 kOhm , unbal. Input: 20 kOhm , bal. |
Gain: | 40,3 dB/ 0,775 V 38 dB/ 1,0 V 35,1 dB/ 1,4 V |
Circuitry: | Class I |
Slew rate: | >10 V/µs |
Damping factor: | >800 |
Crosstalk: | >65 dB |
Control elements: | Power switch, level control per channel, mode switch (stereo/parallel/bridged), Input sensitivity switch |
Controls: | Overheat; overload; short-circuit; softstart; DC voltage; VHF |
Status LED: | Power, level meter, clip, protect |
Connections: | Input: line via 4 x 3-pin XLR (F) mounting version Output: line via 4 x 3-pin XLR (M) mounting version Output: speaker via 4 x speaker built-in socket (F) |
Input sensitivity: | 0,775 V; 1,0 V; 1,4 V , switchable; 26 dB; 32 dB; 38 dB , switchable |
Use of brands: | Built with NEUTRIK connector |
Housing design: | (19") 48.3 cm rack installation 2 U |
Dimensions: | Width: 48,3 cm Depth: 44,5 cm Height: 8,9 cm |
Weight: | 13,90 kg |