Futurelight PLB-230

• With integrated wireless receiver for WDMX operation
• Supports RDM (Remote Device Management)
• 17, 19, 21 or 24 DMX channels selectable
• Very narrow beam angle
• Light beam is centered exactly
• Color wheel with 14 different dichroic color filters plus white
• Rainbow effect with adjustable speed in both directions
• Effect wheel with rotating 3-facet prism and 8-facet prism and frost filter
• Gobo wheel with 8 rotating gobos plus open
• All gobos can be interchanged
• Slot-in gobo system for exchanging gobos without tools
• With gobo shake function
• Motorized focus
• Strobe effect with adjustable speed
• Random strobe effect
• Dimmer
• Exact positioning via 16 bit PAN/TILT movement resolution
• Automatic position correction
• Switch-mode power supply
• Automatic power supply adaption between 100 and 240 Volts without power selector
• Control board with graphic LCD display for adjusting the DMX-starting address, PAN/TILT reverse, reset, lamp on/off, operating hours
• PAN-angle switchable between 630° and 540°
• DMX-controlled operation or stand-alone operation with master/slave function
• Number of scenes in Program Run can be changed individually
• The scenes in Program Run can be modified via the Control Board or via an external controller and loaded into the memory
• Software upload by optional accessory via DMX link
• Sound-controlled via built-in microphone
• With already installed Osram Sirius HRI 230 W lamp
• LED ring equipped with 12 x 3 W TCL (tricolor LED) with RGB colors
• Power connection via Neutrik PowerCon jack and included power cable
• Feed-through output allows to power another device
• After every 8 device the fixtures must have a renewed connection with the power mains
• DMX-control via every standard DMX-controller

Brugervejledning til PLB-230